OPTION menu continued | Hitachi EDPJ32 manual

Multifunctional settings

OPTION menu (continued)

Item		Description

	The ﬁlter time is the time counted after the last resetting. It is shown
	in the OPTION menu as the usage time of the air ﬁlter. Performing
	this item resets the time.
	Pressing the RESET button on the remote control or the button ►
	on the projector displays a dialog to make sure.
FILTER TIME	To perform reset, point at RESET using the button ▲.
FILTER TIME		FILTER TIME
	RESET  CANCEL	0h.
	RESET  CANCEL	RESET
		CANCEL

•Please reset the ﬁlter time only when you have cleaned or replaced the lamp, for a suitable indication about the air ﬁlter.

•For the air ﬁlter care, please see the section "Air ﬁlter". (50)

	Choosing this item displays the SERVICE menu.		SERVICE	:SELECT
	Choose an item using the buttons ▲/▼, and		FANSPEED	NORMAL
	press the button ► or the ENTER button to		AUTO ADJUST
	press the button ► or the ENTER button to		GHOST
	execute the item.		FILTER MESSAGE 100h.
			FACTORY RESET EXECUTE
	FAN SPEED  AUTO ADJUST  GHOST
	FACTORY RESET  FILTER MESSAGE
	FAN SPEED
	Using the buttons ▲/▼ switches the rotation speed of the cooling
	fans.
	HIGH  NORMAL	FANSPEED
	HIGH  NORMAL	HIGH
		NORMAL
SERVICE	The HIGH is the mode for use at highlands etc.

•Note that the projector is noisier when the HIGH is selected.

•Except for use at highlands, please use setting the NORMAL mode. The HIGH mode may shorten the lifetimes of the lamp.

		AUTO ADJUST
		Using the buttons ▲/▼ enables or disables the automatic
		adjustment.
		ENABLE  DISABLE	AUTO ADJUST
		ENABLE  DISABLE	ENABLE
			DISABLE
		Depending on conditions, such as input image, signal cable to the
		unit, environment around the unit, etc. the automatic adjustment
		may not work correctly.
	(to be continued)	In such a case, please choose DISABLE to disable the automatic
	(to be continued)	adjustment, and make adjustment manually.
		adjustment, and make adjustment manually.

ENGLISH

45

Image 45

Hitachi EDPJ32 user manual OPTION menu continued

Contents

Trademark acknowledgment Thank you for purchasing this projectorEDPJ32 User’s Manual - Operating Guide Power on/off ContentBefore use Preparations Maintenance Multifunctional settingsTroubleshooting Warranty and after-service Projector features Before useAbout this manual About contents of package Part names Projector47, 48 Control buttons Remote control Fastening the lens cover Preparations About the ﬁlter cover bottom-up use TabsFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceiling For 43 screens For 169 screens Adjusting the projector’s elevator Elevator feetElevator button Examples of connection with a VCR/DVD player Connecting your devices Examples of connection with a computer About Plug-and-Play capability Example of computer signal Connecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/off Turning off the power Adjusting the volume OperatingTemporarily muting the sound Selecting an input signal Searching an input signalPOWER INPUT For a 43 signal For a 169 signal For no signal 43  Selecting an aspect ratio Adjusting the focus Adjusting the zoom magnifying powerUsing the automatic adjustment feature  For an RGB signal Correcting the keystone distortions Adjusting the position Freezing the screen Using the partial magnify feature Temporarily blanking the screen Using the menu function Multifunctional settings1. To display a menu 2. To choose the target menu 2 Advanced MENU → One of Advanced menus ex. SETUP menu 3. To choose the target item3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE 4. To operate 6. To reset5. To return to the previous menu 7. To close the menu EASY MENU EASY MENU continued PICTURE menu To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOMUsing a test pattern PICTURE menu continued To adjust CUSTOMGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu IMAGE menu continued When this adjustment is too large, certain degradation may appearat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menu SCREEN menu SCREEN menu continued Although the adjustable range will vary depending on inputs, andthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lock OPTION menu automatically. When the time is set to 1 to 99, and when the passedblinking. Please refer to the section “Turning off the power”.  OPTION menu continued you to clean “REMINDER...” will appear after the timer reaches the press the ENTER button on the remote control or the INPUT buttoncontinued 50h  100h  200h  300h  TURN OFF Lamp Maintenance Type number = DT00707 In the case of replacement by yourself 1 Press the MENU button to display a menu Type number = NJ22642 Air ﬁlterUsual ﬁlter cover Filter cover for bottom-up use Filter cover for bottom-up use Caring for the cabinet and remote control Inside of the projectorCaring for the lens There is no input signal TroubleshootingA note of precaution when cleaning the air ﬁlter Related messages The projector is cooling down. A certain error Regarding the indicator lampsThe projector is in a standby state The projector is in an on state Regarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defects Perform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service 202 285 Dimension diagramSpeciﬁcations 33.5