OPTION menu | Hitachi EDPJ32 guide

Multifunctional settings

OPTION menu

With the OPTION menu, the items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	AUTO SEARCH	TURN OFF
IMAGE	AUTO OFF	0min
INPUT	LAMP TIME	0h
SETUP	FILTER TIME	0h
SCREEN	SERVICE
OPTION
EASY MENU

Item

Description

Using the buttons ▲/▼ turns on/off the automatic signal search function.

TURN ON  TURN OFF

When the TURN ON is selected, detecting no signal automatically AUTO SEARCH cycles through input ports in the following order.

RGB  S-VIDEO  VIDEO

Then when an input is found, the projector will stop searching and display the image.

Using the buttons ▲/▼ adjusts the time to count down to automatically turn the projector off.

	Long (max. 99 minutes)  Short (min. 0 minute = DISABLE)
	AUTO OFF	AUTO OFF
	ENABLE	DISABLE
AUTO OFF	10min.	0min.
AUTO OFF	When the time is set to 0, the projector is not turned off
	When the time is set to 0, the projector is not turned off
	automatically. When the time is set to 1 to 99, and when the passed
	time with a no-signal or an unsuitable signal reaches at the set
	time, the projector lamp will go off and the power indicator begins
	blinking. Please refer to the section “Turning off the power”. (20)
	The lamp time is the time counted after the last resetting. It is
	shown in the OPTION menu as the usage time of the lamp.
	Performing this item resets the time.
	Pressing the RESET button on the remote control or the button ►
	on the projector displays a dialog to make sure.		LAMP TIME
LAMP TIME	To perform reset, point at RESET using the button ▲.		0h.
LAMP TIME	RESET  CANCEL		RESET
			CANCEL

•Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

•For the lamp replacement, please see the section "Lamp".

(47, 48, 49)

44

Image 44

Hitachi EDPJ32 user manual OPTION menu, automatically. When the time is set to 1 to 99, and when the passed

Contents

Thank you for purchasing this projector Trademark acknowledgmentEDPJ32 User’s Manual - Operating Guide Content Power on/offBefore use Preparations Multifunctional settings MaintenanceTroubleshooting Warranty and after-service About this manual Projector featuresBefore use About contents of package 47, 48 Part namesProjector Remote control Control buttons Preparations Fastening the lens cover Filter cover’s knob Filter cover for bottom-up use with an air ﬁlter About the ﬁlter cover bottom-up useTabs When put on a table When suspended from the ceiling Arrangement For 169 screens For 43 screens Elevator button Adjusting the projector’s elevatorElevator feet Connecting your devices Examples of connection with a VCR/DVD player Examples of connection with a computer Example of computer signal About Plug-and-Play capability Connecting power supply Loading batteries into the remote control Using the remote control Power on/off Turning on the power Turning off the power Temporarily muting the sound Adjusting the volumeOperating POWER INPUT Selecting an input signalSearching an input signal For a 169 signal For a 43 signal For no signal 43  Selecting an aspect ratio Adjusting the zoom magnifying power Adjusting the focusUsing the automatic adjustment feature  For an RGB signal Adjusting the position Correcting the keystone distortions Using the partial magnify feature Freezing the screen Temporarily blanking the screen Multifunctional settings Using the menu function1. To display a menu 2. To choose the target menu 3. To choose the target item 2 Advanced MENU → One of Advanced menus ex. SETUP menu3 Advanced MENU → EASY MENU 1 In the EASY MENU ex. KEYSTONE 6. To reset 4. To operate5. To return to the previous menu 7. To close the menu EASY MENU EASY MENU continued Using a test pattern PICTURE menuTo adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM GAIN adjustments mainly affect color intensity on PICTURE menu continuedTo adjust CUSTOM Using the buttons / switches the progress mode IMAGE menu at the frame area of the picture. In such a case, please adjust small IMAGE menu continuedWhen this adjustment is too large, certain degradation may appear Choosing this item performs the automatic adjustment feature INPUT menu SETUP menu MIRROR item in the SETUP menu, if the projector screen is inclined SCREEN menu the frame may not move for some signals. To restore the screen SCREEN menu continuedAlthough the adjustable range will vary depending on inputs, and MyScreen Lock MESSAGE blinking. Please refer to the section “Turning off the power”.  OPTION menuautomatically. When the time is set to 1 to 99, and when the passed OPTION menu continued press the ENTER button on the remote control or the INPUT button you to clean “REMINDER...” will appear after the timer reaches thecontinued 50h  100h  200h  300h  TURN OFF Maintenance Lamp In the case of replacement by yourself Type number = DT00707 1 Press the MENU button to display a menu Air ﬁlter Type number = NJ22642Usual ﬁlter cover Filter cover for bottom-up use Filter cover for bottom-up use Caring for the lens Caring for the cabinet and remote controlInside of the projector Troubleshooting There is no input signalA note of precaution when cleaning the air ﬁlter Related messages Regarding the indicator lamps The projector is cooling down. A certain errorThe projector is in a standby state The projector is in an on state Regarding the indicator lamps continued Phenomena that may easily be taken as machine defects If the situation cannot be corrected Perform picture adjustments by changing the COLOR TEMP, COLOR Warranty and after-service Speciﬁcations Dimension diagram 202 285Speciﬁcations 33.5