SCREEN menu continued, Description, MyScreen Lock | Hitachi EDPJ32

Multifunctional settings

SCREEN menu (continued)

	Item	Description

		Using the buttons ▲/▼ turns on/off the MyScreen lock function.
	MyScreen Lock	TURN ON  TURN OFF
	MyScreen Lock	When the TURN ON is selected, the item MyScreen is locked. Use

		this function for protecting the current MyScreen.
		Using the buttons ▲/▼ turns on/off the message function.
		TURN ON  TURN OFF
		When the TURN ON is selected, the following message function
		works.
	MESSAGE	“AUTO IN PROGRESS” while automatically adjusting
	MESSAGE	”NO INPUT IS DETECTED”
		”SYNC IS OUT OF RANGE”
		”Searching …” while searching for an input signal
		”Detecting …” when an input signal is detected
		The input signal display displayed when it is changed
		The aspect ratio display displayed when it is changed

ENGLISH

43

Image 43

Hitachi EDPJ32 user manual SCREEN menu continued, Description, MyScreen Lock, Message

Contents

User’s Manual - Operating Guide Thank you for purchasing this projectorTrademark acknowledgment EDPJ32 Preparations ContentPower on/off Before use Warranty and after-service Multifunctional settingsMaintenance Troubleshooting Before use Projector featuresAbout this manual About contents of package Projector Part names47, 48 Control buttons Remote control Fastening the lens cover Preparations Tabs About the ﬁlter cover bottom-up useFilter cover’s knob Filter cover for bottom-up use with an air ﬁlter Arrangement When put on a table When suspended from the ceiling For 43 screens For 169 screens Elevator feet Adjusting the projector’s elevatorElevator button Examples of connection with a VCR/DVD player Connecting your devices Examples of connection with a computer About Plug-and-Play capability Example of computer signal Connecting power supply Loading batteries into the remote control Using the remote control Turning on the power Power on/off Turning off the power Operating Adjusting the volumeTemporarily muting the sound Searching an input signal Selecting an input signalPOWER INPUT Selecting an aspect ratio For a 169 signalFor a 43 signal  For no signal 43   For an RGB signal Adjusting the zoom magnifying powerAdjusting the focus Using the automatic adjustment feature Correcting the keystone distortions Adjusting the position Freezing the screen Using the partial magnify feature Temporarily blanking the screen 2. To choose the target menu Multifunctional settingsUsing the menu function 1. To display a menu 1 In the EASY MENU ex. KEYSTONE 3. To choose the target item2 Advanced MENU → One of Advanced menus ex. SETUP menu 3 Advanced MENU → EASY MENU 7. To close the menu 6. To reset4. To operate 5. To return to the previous menu EASY MENU EASY MENU continued To adjust #1 CUSTOM, #2 CUSTOM or #3 CUSTOM PICTURE menuUsing a test pattern To adjust CUSTOM PICTURE menu continuedGAIN adjustments mainly affect color intensity on Using the buttons / switches the progress mode IMAGE menu When this adjustment is too large, certain degradation may appear IMAGE menu continuedat the frame area of the picture. In such a case, please adjust small Choosing this item performs the automatic adjustment feature INPUT menu MIRROR item in the SETUP menu, if the projector screen is inclined SETUP menu SCREEN menu Although the adjustable range will vary depending on inputs, and SCREEN menu continuedthe frame may not move for some signals. To restore the screen MESSAGE MyScreen Lock automatically. When the time is set to 1 to 99, and when the passed OPTION menublinking. Please refer to the section “Turning off the power”.  OPTION menu continued 50h  100h  200h  300h  TURN OFF press the ENTER button on the remote control or the INPUT buttonyou to clean “REMINDER...” will appear after the timer reaches the continued Lamp Maintenance Type number = DT00707 In the case of replacement by yourself 1 Press the MENU button to display a menu Filter cover for bottom-up use Air ﬁlterType number = NJ22642 Usual ﬁlter cover Filter cover for bottom-up use Inside of the projector Caring for the cabinet and remote controlCaring for the lens Related messages TroubleshootingThere is no input signal A note of precaution when cleaning the air ﬁlter The projector is in an on state Regarding the indicator lampsThe projector is cooling down. A certain error The projector is in a standby state Regarding the indicator lamps continued If the situation cannot be corrected Phenomena that may easily be taken as machine defects Perform picture adjustments by changing the COLOR TEMP, COLOR Speciﬁcations Warranty and after-service 33.5 Dimension diagram202 285 Speciﬁcations