Preparations
Examples of connection with a computer
Audio cable
RGB cable
Audio out | RGB out |
K
CAUTION ►Turn off all devices prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector.
►Use the accessory cable or a
►Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.
NOTE • Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop’s RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.
•Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
•Secure the screws on the connectors and tighten.
•Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
•The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
•For some RGB signal modes, the optional Mac adapter is necessary.
•Automatically adjustment may not function correctly with some input signals.
•When the image resolution is changed on a computer, depending on an input, automatic adjustment function may take some time and may not be completed. In this case, you may not be able to see a check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to the original.
It might be recommended to use other CRT or LCD monitors to change the resolution.
14
