Hitachi L300IP 0 EU, Restoring Factory Default Settings, 0USA

Restoring Factory Default Settings

		Action				Display	Function/Parameter
Press the	FUNC. ,		1	or	2	b- - -	“b” Group selected
keys as needed.
Press the	FUNC. key.					b001	First “b” Group parameter
Press/hold the			1	key until...		b085	Country code for
							initialization selected
Press the	FUNC. key. If setting is					02	00 = Japan
							01 = Europe
correct, then skip next step.							02 = United States
To change country code, press						1 or	2 key to set; STR to store.
Press the	FUNC.		key.			b085	Country code for
							initialization selected
Press the		2	key.			b084	Initialization function
							selected
Press the	FUNC. key.					00	0 = disable initialization,
							clear trip history only
Press the		1	key.			01	1 = enable initialization
Press the	STR		key.			b084	Initialization now enabled to
							restore all defaults
Press/hold the			1	and	2	b084	First part of key sequence,
							the “b” is flashing
keys, then press/hold the					FUNC.
key. Do not release yet.
Press/hold the RESETSTOP				(STOP)		b084	Entire “b084” display will
							begin flashing
key for 3 seconds.
Release the		RESETSTOP (STOP) key.				0 EU	Default parameter country
							code shown during initializa-
						0USA
							tion process
Release the		1	,	2 , and		d001	Final part of key sequence,
							function code for output
FUNC. keys together.							frequency monitor shown
							after initialization is
							complete

11