Hitachi L300IP “A” Group: Standard Functions

“A” Group: Standard Functions

Func.			Default Value	Set
		Name / Description	–FE2 / –FU2 /
Code				Value
			–FR
A001	Frequency source setting		01 / 01 / 00
	• 00 Keypad potentiometer
	• 01 Control terminal
	• 02 Function F001 setting
	• 03 RS485 serial command
	• 04 Expansion board 1
	• 05 Expansion board 2
A002	Run command source setting		01 / 01 / 02
	• 01 Input terminal FW or RV (assignable)
	• 02 Run key on keypad, or digital operator
	• 03 RS485 serial command
	• 04 Start/Stop, expansion card #1
	• 05 Start/Stop, expansion card #2
A003/	Base frequency setting		50. / 60. / 60.
A203
A004/	Maximum frequency setting		50. / 60. / 60.
A204
A005	[AT] selection		00
	• 00 Select between [O] and [OI] at [AT]
	• 01 Select between [O] and [O2] at [AT]
A006	[O2] selection		00
	• 00 No summing, [O2] and [OI]
	• 01 Sum of [O2] and [OI], negative sum
	(reverse speed reference) inhibited
	• 02 Sum of [O2] and [OI], negative sum
	(reverse speed reference) allowed
A011	[O]–[L] input active range start frequency		0.00
A012	[O]–[L] input active range end frequency		0.00 / 60.0 /
			0.00
A013	[O]–[L] input active range start voltage		0.
A014	[O]–[L] input active range end voltage		100.
A015	[O]–[L] input start frequency enable		01
	• 00 Use A011 start value
	• 01 Use 0 Hz
A016	External frequency filter time constant		8.
A019	Multi-speed operation selection		00
	• 00 Binary; up to 16-stage speed using
	4 intelligent terminals
	•	01 Single-bit; up to 8-stage speed using
	7	intelligent terminals
A020/	Multi-speed frequency setting		0.00
A220

15