3 Press the PLAY button on VCR-2. You will see the taped program being
played on the TV.
4 When you see the part of the program you wish to record, press the PAUSE button on VCR-1
again to release pause and start recording.
•Press the STOP button to finish recording.
• Problem guide
No power
Remote control doesn't
work
Won't record
Won't play back
Won't make timer
recordings
•Make sure the VCR is plugged intoan AC outlet.
•Make sure the batteries are fresh, and properly
installed.
•Safety tab has been removed from cassette 0#CR
will
automatically eject the tape).
• Make sure the TVNCR switch is set to the VCR
mode.
• Make sure the TV is set to the VCR channel (3 or
4) or AUX (if
usin_ldirect audio/video hookup).
• The VCR power must be turned off to activate
timer recording.
• Clock is not set correctly.
• Programs entered incorrectly.
• Programs exceed the length of the cassette. Use
the EP
recording speed for maximum programming.
• Safety tab has been removed from cassette. 66