Cleaning Port Plug Screw, Vent | Hobart HPGF15 specs

Cleaning Port Plug Screw

The O-Ring seal on the cleaning port plug screw (Fig. 24) needs to be replaced if liquid is leaking around the screw.

CLEANING PORT

PLUG SCREW

O - RING SEAL

PL-40912-1

Fig. 24

VENT

When fryer is off and cool, annually examine the flue and clear any obstructions.

Contact personnel qualified to install and repair gas equipment for all other maintenance problems.

– 23 –

Image 23

Hobart HPGF15 manual Cleaning Port Plug Screw, Vent

Contents

Truct For Your Safety Important for Your Safety Table of Contents Unpacking Installation Location Installation Codes and StandardsAssembly Installing Casters GAS Connections Exhaust Pipe Lighting Instructions Testing the GAS Supply SystemFlue Connections Electrical Connections PL-40937-1 PL-40936-1 Before First USE Operation Turning the Fryer on Filling the Kettle with Liquid Shortening Frying Procedure for ALL Foods Extended Shutdown HIGH-LIMIT SwitchPower Failure Turning the Fryer OFF Food PRESSURE-RELIEF ValveSuggested Cooking Guide Temp Min Using the HMF50 or HMF85 FilterOther Items Which May Be Prepared in the Pressure Fryer Temp Time Food Filtering Oil at the End of the Production Day Aluminum Kettle CleaningDaily Cleaning Stainless Steel Weekly Cleaning More Often if Required Solenoid Assembly Fig Cleaning After Every Production Period Exhaust Tank Kettle Tilt Lid Pressure-Relief Valve Monthly Cleaning Exhaust Tank Remove Bolt Kettle Pressure-Regulator Assembly MaintenanceLID O-RING Seal Replacement Other O-RING Seal Replacements Vent Cleaning Port Plug Screw Lid will not lock do not Operate Fryer TroubleshootingSymptom Possible Causes