ASSEMBLY
Carefully remove and inspect all loose parts packed with the rotisserie oven, including the following:
Overflow Tube (1) | Skim Tube (1) | Ceramic Logs (4) |
Removable Rear Panel (1) | Door Handle Knobs (2) | Wire Rack (1) |
Unwrap foot pedal switch and place on floor.
Screw the door handle knobs onto the door handle rods and tighten them firmly (Fig. 1).
Hang the upper edge of the removable hanging panel from the hanger strip on the rear wall inside the rotisserie (Fig. 2). Panel must be flat against rear rotisserie oven cavity wall.
HANGING PANEL
Fig. 1 | Fig. 2 |
Place ceramic logs on log rack. Place logs beginning on the left side with the right side of each log angled down (Fig. 3). Place the left ceramic log over the ignitor box to prevent fat from clogging the burner holes.
CERAMIC LOGS
IGNITOR BOX
Fig. 3
– 6 –