Home Automation 20A00-1 installation manual Omni II Specifications, Vdc

OMNI II SPECIFICATIONS

Size: Controller: 13 W x 13 H x 4.5 D

Console: 4.6 W x 4.5 H x 1.2 D

Weight: Controller: approx. 10 lb.

Console: approx. 0.5 lb.

Operating		32	- 122 degrees F			(0 - 50 degrees C)
Ranges:		10	- 95 % relative			humidity, non-condensing
Power:		120 VAC, 60 Hz,			60	watts
Transformer:		24	VAC, 1.67 amps,			40 VA
Battery:		Rechargeable Lead-Acid, 12 volts, 7 amp-hour
Device Fuse:		Polyfuse:		1.35	A
Horns Fuse:		Polyfuse:		1.35	A
Battery Fuse:		Polyfuse:		4.00	A
Polyfuses are		permanent fuses			that do not need replacement.
Nominal Voltage:				10 - 13.7		VDC, 0.5 V max. peak to peak ripple
Low Voltage Cut Out:				approx. 9		VDC
Typical Current Consumption at Nominal Voltage:
	Controller:			135 mA
	Console: backlight off - 35 mA; backlight on - 100 mA
Controller	Maximum Group Current					Outputs:
Devices:	AUX 12 VDC, SWITCH				12	VDC, CONSOLE, and OUTPUTS 1 - 8: 1 A
Horn:	INT HORN and EXT HORN: 1 A
Controller	Maximum Individual				Current Outputs:
Devices:	(Do not exceed 1 A				total)
AUX	12	VDC				1 A
SWITCH		12	VDC			1 A
CONSOLE						1 A
OUTPUTS 1			- 8			100 mA

For 24-Hour Battery Standby Time, the following must be observed: (See Figure 15)

Controller Maximum Group Current Outputs (applies to residential and commercial):

Devices: AUX 12 VDC, SWITCH 12 VDC, CONSOLE, and OUTPUTS 1 - 8: 250mA

Horn: INT HORN and EXT HORN: 300mA

Page 51