operation
APPLICATIONS
You may use this product for the purposes listed below:
Basic limbing, felling, and bucking
Removing buttress roots
WARNING:
Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting the engine. DO NOT SMOKE! Stay away from open flames or sparks. Failure to heed this warning could result in serious personal injury.
FUEL AND REFUELING HANDLING THE FUEL SAFELY
WARNING:
Check for fuel leaks. If any are found, correct them before using the saw to prevent fire or burn injury.
nAlways handle fuel with care; it is highly flam- mable.
nAlways refuel outdoors and do not inhale fuel vapors.
nDo not let gasoline or lubricant come in contact with skin.
nKeep gasoline and lubricant away from the eyes.
If gasoline or lubricant comes in contact with the eyes, wash them immediately with clean water. If irritation is still present, see a doctor immediately.
nClean up spilled fuel immediately.
Refer to Refueling in the Specific Safety Rules section of this manual for additional safety infor- mation.
MIXING THE FUEL
nThis product is powered by a
nThis engine is certified to operate on unleaded gasoline intended for automotive use with an octane rating of 87 [(R + M) / 2] or higher.
■nDo not use any type of
■nUse a high quality
■nMix 2% lubricant into the gasoline. This is a 50:1 ratio.
nMix the fuel thoroughly and each time before fueling.
■nMix in small quantities. Do not mix quantities larger than usable in a
PREMIUM EXACT MIX™ (50:1)
GASOLINE | Lubricant |
1 Gallon (US) | 2.6 oz. |
1 Liter | 20 cc (20 ml) |
Page 12 — English