Terminal ID Table

TerminalModel(s)Terminal ID

IBM

PC/AT and compatibles

003

 

PS2 Keyboard

002

 

USB SurePOS Handheld Scanner

128

 

USB SurePOS Tabletop Scanner

129

RS232

True

000

 

TTL

000

RS485

 

051

USB

Serial

130

 

PC Keyboard

124

 

Mac Keyboard

125

 

Japanese Keyboard (PC)

134

 

HID POS

131

Data Format Editor Commands

Send CommandsSend all characters

F1 Include in the output message all of the characters from the input message, starting from current cursor position, followed by an insert character. Syntax = F1xx where xx stands for the insert character’s hex value for its ASCII code. Refer to the ASCII Conversion Chart (Code Page 1252), page A-2for decimal, hex and character codes.

Send a number of characters

F2 Include in the output message a number of characters followed by an insert character. Start from the current cursor position and continue for “nn” characters or through the last character in the input message, followed by character “xx.” Syntax = F2nnxx where nn stands for the numeric value (00-99) for the number of characters, and xx stands for the insert character’s hex value for its ASCII code.

Refer to the ASCII Conversion Chart (Code Page 1252), page A-2for decimal, hex and character codes.

F2 Example: Send a number of characters

Send the first 10 characters from the bar code above, followed by a carriage return. Command string: F2100D

F2 is the “Send a number of characters” command

10 is the number of characters to send

0D is the hex value for a CR

The data is output as: 1234567890

F2 and F1 Example: Split characters into 2 lines

Send the first 10 characters from the bar code above, followed by a carriage return, followed by the rest of the charac- ters.

Command string: F2100DF10D

F2 is the “Send a number of characters” command

10 is the number of characters to send for the first line

0D is the hex value for a CR

F1 is the “Send all characters” command

0D is the hex value for a CR

6 - 3