ming parameters for a scanner. This saved file can be e-mailed or, if required, you can create a single bar code that contains all the customized programming parameters and mail or fax that bar code to any location. Users in other locations can scan the bar code to load in the customized programming.

To communicate with a scanner, EZConfig-Scanning requires that the PC have at least one available serial communication port, or a serial port emulation using a physical USB port. If you are using the serial port and RS232 cable, an external power supply is required. When using a USB serial port emulation, only a USB cable is required.

EZConfig-Scanning Operations

The EZConfig-Scanning software performs the following operations:

Scan Data

Scan Data allows you to scan bar codes and display the bar code data in a window. Scan Data lets you send serial commands to the scanner and receive scanner response that can be seen in the Scan Data window. The data displayed in the Scan Data window can either be saved in a file or printed.

Configure

Configure displays the programming and configuration data of the scanner. The scanner's programming and configuration data is grouped into different categories. Each category is displayed as a tree item under the “Configure” tree node in the application explorer. When one of these tree nodes is clicked, the right-hand side is loaded with the parameters' form belonging to that particular category. The Configure tree option has all the programming and configuration parameters specified for a scanner. You can set or modify these parameters as required. You can later write the modified settings to the scanner, or save them to a dcf file.

Installing EZConfig-Scanning from the Web

Note: EZConfig-Scanning requires .NET software. If .NET is not installed on your PC, you will be prompted to install it during the EZConfig-Scanning installation.

1.Access the Honeywell web site at www.honeywellaidc.com

2.Click on the Resources tab. Select Software.

3.Click on the dropdown for Select Product Number. Click on your product number.

4.Click on the listing for EZConfig-Scanning.

5.When prompted, select Save File, and save the files to the c:\windows\temp directory.

6.Once you have finished downloading the file, exit the web site.

7.Using Explorer, go to the c:\windows\temp file.

8.Double click on the Setup.exe file. Follow the screen prompts to install the EZConfig-Scanning program.

9.If you’ve selected the defaults during installation, you can click on Start Menu-AllPrograms-Honeywell-EZConfig-

Scanning.

9 - 2