Honeywell 1200g, 1202g <Default All Code 11 Settings, Code 11 On/Off, Check Digits Required, Matrix 2 of 5 Message Length, * Off, Required, Minimum Message Length

Matrix 2 of 5 Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 7-1)for additional information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.

Minimum Message Length

Maximum Message Length

Code 11

<Default All Code 11 Settings>

Code 11 On/Off

On

* Off

Check Digits Required

These options set whether 1 or 2 check digits are required with Code 11 bar codes. Auto Select Check Digits determines the number of check digits based on the length of the bar code. If the bar code is 10 digits or more, 2 check digits are required. If it is 9 digits or less, 1 check digit is required. The check digit data is only transmitted if you program that feature

(see Check Digit Validation on page 7-16).Default = Two Check Digits Required.

One Check Digit Required* Two Check Digits Required

Auto Select Check Digits

Required

7 - 15