Honeywell 1200g, 1202g manual 186

Selection	Setting	Serial Command	Page
	* Indicates default	# Indicates a numeric entry
Straight 2 of 5 IATA Message Length	Minimum (1 - 80) *13	A25MIN##	7-13
	Maximum (1 - 80) *15	A25MAX##	7-13
Matrix 2 of 5	Default All Matrix 2 of 5	X25DFT	7-14
	Settings
	*Off	X25ENA0	7-14
	On	X25ENA1	7-14
Matrix 2 of 5 Redundancy	Range (0 - 10) *0	X25VOT##	7-14
Matrix 2 of 5 Message Length	Minimum (1 - 80) *3	X25MIN##	7-15
	Maximum (1 - 80) *80	X25MAX##	7-15
Matrix 2 of 5 Check Char.	*No Check Char.	X25CK20	7-14
	Validate, But Don’t	X25CK21	7-14
	Transmit
	Validate and Transmit	X25CK22	7-14
Code 11	Default All Code 11	C11DFT	7-15
	Settings
	*Off	C11ENA0	7-15
	On	C11ENA1	7-15
Code 11 Check Digits Required	1 Check Digit Required	C11CK20	7-15
	*2 Check Digits Required	C11CK21	7-15
	Auto Select Check Digits Required	C11CK22	7-15
Check Digit Validation	Validate and Transmit One Check Digit	C11CK23	7-16
	Validate and Transmit Two Check Digits	C11CK24	7-16
	Validate and Transmit Auto Select Check	C11CK25	7-16
	Digits
Code 11 Redundancy	Range (0 - 10) *0	C11VOT##	7-16
Code 11 Message Length	Minimum (1 - 80) *3	C11MIN##	7-16
	Maximum (1 - 80) *80	C11MAX##	7-16
Code 128	Default All Code 128	128DFT	7-17
	Settings
	Off	128ENA0	7-17
	*On	128ENA1	7-17
128 Group Separator Output	*Off	128GSE0	7-17
	On	128GSE1	7-17
Code 128 Redundancy	Range (0 - 10) *0	128VOT##	7-17
Code 128 Message Length	Minimum (1 - 80) *3	128MIN##	7-18
	Maximum (1 - 80) *80	128MAX##	7-18
ISBT 128	*Off	ISBENA0	7-18
	On	ISBENA1	7-18
	Concatenation Timeout	DLYCCT	7-18

10 - 18