Honeywell 1200g, 1202g Manual Activation Laser Timeout - Button Settings, Save, In-Stand, Out-of-Stand, Release In-Stand, Good Read In-Stand, Release Out-of-Stand

* End Manual Activation AfterGood Read In-Stand

Do Not End Manual Activation

After Good Read Out-of-Stand

* End Manual Activation After

Good Read Out-of-StandManual Activation Laser Timeout - Button Settings

You can set a timeout for the length of time the laser remains on and attempting to decode bar codes when the button is held down, and after it is released. Set the length (in milliseconds) for a timeout by scanning one of the following bar codes, then setting the timeout (from 1-65535 milliseconds) by scanning digits from the Programming Chart, then scanning Save.

Default = Button Hold In-Stand 5000 ms, Button Hold Out-of-Stand 5000 ms, Button Release In or Out-of-Stand 0.

Laser Timeout - Button Hold

In-Stand

Laser Timeout - ButtonRelease In-Stand

Laser Timeout - Button Hold

Out-of-Stand

Laser Timeout - Button

Release Out-of-Stand

4 - 8