Honeywell 1200g, 1202g manual 180

Selection	Setting	Serial Command	Page
	* Indicates default	# Indicates a numeric entry
Beeper - Transmit Order	*Before Transmission	BEPWHN1	4-2
	After Transmission	BEPWHN2	4-2
Beeper Pitch - Error (Frequency)	*Razz (100 Hz)	BEPFQ2100	4-3
	Medium (2000 Hz)	BEPFQ22000	4-3
	High (4200 Hz)	BEPFQ24200	4-3
Beeper Duration - Good Read	*Normal Beep	BEPBIP0	4-3
	Short Beep	BEPBIP1	4-3
Number of Beeps - Good Read	Range 1 - 9 (*1)	BEPRPT#	4-3
Number of Beeps - Error	Range 1 - 9 (*1)	BEPERR#	4-4
LED Settings	Red LED Off	LEDFN10	4-4
	Green LED Off	LEDFN20	4-4
	Red LED On with Good Scan	LEDFN11	4-4
	*Green LED On with Good Scan	LEDFN21	4-4
	Red LED On with Laser	LEDFN12	4-4
	*Red LED On with Laser/Red LED Blinks	LEDFN11026	4-4
	when Battery is Low
	Green LED On with Laser	LEDFN22	4-4
	Red LED On when CodeGate Disabled	LEDFN14	4-4
	Green LED On when CodeGate Disabled	LEDFN24	4-5
LED Settings (continued)	Red LED On when In-Stand	LEDFN18	4-5
	Green LED On when In-Stand	LEDFN28	4-5
	Red LED On with CTS	LEDFN1128	4-5
	Green LED On with CTS	LEDFN2128	4-5
	Red LED when Battery is Low	LEDFN11024	4-5
	Green LED when Battery is Low	LEDFN21024	4-5
LED Brightness	Red Off	LEDIN10	4-5
	Green Off	LEDIN20	4-5
	Red Low	LEDIN11	4-5
	Green Low	LEDIN21	4-5
	Red Medium	LEDIN12	4-6
	Green Medium	LEDIN22	4-6
	*Red High	LEDIN13	4-6
	*Green High	LEDIN23	4-6

10 - 12