Honeywell 1200g, 1202g CodeGate, Button Function, Object Detection Mode, Off, Off, In-Stand, In-Stand, CodeGate On, CodeGate On, CodeGate Off, Out-of-Stand, Out-of-Stand

CodeGate

When CodeGate is On, the button is used to allow decoded data to be transmitted to the host system. The scanner remains on, scanning and decoding bar codes, but the bar code data is not transmitted until the button is pressed. When CodeGate is Off, bar code data is transmitted when it is decoded. Default = CodeGate Off in-Stand, CodeGate On Out-of-

Stand.

*CodeGate Off In-StandCodeGate On

In-Stand

CodeGate Off

Out-of-Stand

* CodeGate On

Out-of-Stand

Button Function

Note: Button Function applies only to the Voyager 1202. It is not supported in the Voyager 1200.

When Button Function is set to On, press and hold the button for 7 seconds to change the CodeGate setting from Code- Gate Off Out-of-Standto CodeGate On Out-of-Stand. When the scanner is power cycled, the CodeGate function reverts to the saved CodeGate setting. When Button Function is set to Off, holding the button down for 7 seconds shuts down the

scanner. Default = Off.

* Button Function OffButton Function OnObject Detection Mode

Object Detection Mode uses an LED to detect when an object is in the scanner’s field of view. When an object is detected,

the laser turns on and the scanner attempts to scan the bar code. Default = Object Detection Mode On In-Stand.

Object Detection Mode Off

In-Stand

4 - 9