Manuals / Brands / Computer Equipment / Barcode Reader / Honeywell / Computer Equipment / Barcode Reader

Honeywell 1200g, 1202g Radio, Battery, Mechanical, Environmental, Embedded Laser, Scan Performance

1 222

Download 222 pages, 3.27 Mb

Parameter	Specification

Maximum Power Output	< 1 mw

Embedded Laser

Wavelength	645 - 660 nm

Divergence	< 1.5 mrad. per IEC 60825-1 worst case

Maximum Power Output	10 mw

Voyager 1202g Product Specifications

	Parameter	Specification


	Mechanical

	Height	3.6 in. (92mm)

	Length	7.1 in. (180mm)

	Width	2.6 in. (66mm)

	Weight (includes battery)	6.3 oz. (180g)

	Battery

	Lithium Ion	1800 mAHr minimum

	Number of Scans	Up to 45,000 per charge

	Expected Hours of Operation	12

	Expected Charge Time	4 hours (external supply)
	Expected Charge Time	8 hours (USB power)
		8 hours (USB power)

	Radio

	Frequency	2.4 to 2.5 GHz (ISM Band) Frequency Hopping Bluetooth v.2.1

	Range	33 ft. (10 m) typical line of sight

	Data Rate	Up to 3 MBps

	Environmental

	Temperature Ranges:
	Operating - Charging	41° F to +104° F (5° C to 40° C)
	Operating - Non-Charging	32° F to +122° F (0° C to 50° C)
	Storage	23°F to +95°F (-5°C to 35°C)
	Humidity	0 to 95% relative humidity, non-condensing

	Mechanical Drop	Designed to withstand 30 drops from 5 feet (1.5m) to concrete

	Environmental Sealing	IP42

	ESD Sensitivity	16kV air
	ESD Sensitivity	9kV contact
		9kV contact

	Scan Performance

	Pitch, Skew	60°, 60°

11 - 2

Contents

Page Page FCC Part 15 Subpart B Class B UL Statement Industry Canada ICES-003 Conformité à la règlementation canadienne C-ULStatement Honeywell Scanning & Mobility Product Environmental Information C-TickStatement LED Safety Statement CB Scheme Laser Safety Statement Scanner Laser Beam FCC Part 15 Subpart C Industry Canada Page Radio Technology Page Page Page Page Table of Contents Keyboard Wedge Modifiers ALT Mode Keyboard Style Keyboard Conversion Inter-ScanCode Delay Flash Updates Beeper and LED Sequences and Meaning Paging Error Indicators Base Address Chapter 5 - Data Editing Suffix Selections Intercharacter Delay Chapter 6 - Data Formatting Data Format Editor Introduction To Add a Data Format Chapter 8 - Interface Keys Chapter 9 - Utilities Chapter 10 - Serial Programming Commands Chapter 11 - Product Specifications Chapter 12 - Maintenance Chapter 13 - Customer Support Appendix A - Reference Charts Sample Symbols Programming Chart Page Getting Started Connecting with Keyboard Wedge Communications Base Keyboard Wedge Connecting with RS232 Serial Port Base RS232 Serial Port Connecting with RS485 Base RS485 Good Read Bad Read Set Custom Defaults Save Custom Defaults Set Custom Defaults Activate Custom Defaults Programming the Interface IBM Port 9B HHBCR-1Interface IBM Port 17 Interface HHBCR-2Interface OPOS Mode OPOS Mode USB IBM SurePos USB IBM SurePos (USB Handheld Scanner) Interface (USB Tabletop Scanner) USB PC or Macintosh Keyboard USB HID HID Fallback Mode HID Fallback Mode USB Serial Emulation CTS/RTS Emulation ACK/NAK Mode Communication Timeout Beeper Off * On Support BEL/CAN in ACK/NAK BEL/CAN On Page Page Keyboard Countries Keyboard Countries (Continued) Page Page Page Page Page Page Page ALT Mode 3 Characters 4 Characters * Off Keyboard Style Keyboard Conversion Convert All Characters to Upper Case Convert All Characters to Lower Case * Keyboard Conversion Off Convert All Characters to Upper Inter-ScanCode Delay <F0> Break Character Suppress * Transmit Keyboard Wedge Defaults Keyboard Wedge Defaults RS232 Baud Rate RS232 Word Length: Data Bits, Stop Bits, and Parity Data Bits Stop Bits Parity RS232 Handshaking RTS/CTS Off: RTS/CTS Off, RTS Inactive: Flow Control, No Timeout: Character-Based RS232 Timeout RS232 Timeout XON/XOFF XON/XOFF On XON/XOFF Off ACK/NAK ACK/NAK Off ACK/NAK On * ACK/NAK Off RS232 Defaults RS232 Defaults NCR ACK/NAK Block Check Character Transmit Don’t Transmit NCR Prefix NCR Prefix NCR NOF (Not-on-File)Error Scanner-BiopticPacket Mode Packet Mode On * Packet Mode Off Packet Mode On Page Cordless System Operation Linking Process Scanner Is Out of Range Scanner Is Moved Back Into Range Out of Range and Back into Range with Batch Mode On Charging Information Battery Recommendations Caution: Safety Precautions for Lithium Batteries Proper Disposal of the Battery Scanner LED Sequences and Meaning LED Indication Beeper Indication Cause Normal Operation Paging Mode Paging Mode Off * Paging Mode On Paging Pitch * Low (1000 Hz) Medium (3250 Hz) High (4200 Hz) Scanner Address Linked Modes Locked Link Mode - Single Scanner Locked Link Mode (Single Scanner) Unlink Scanner Alarm Sound Type Alarm Duration Timer Off 200 seconds 400 seconds 900 seconds * 3600 seconds Batch Mode Beep Batch Mode Beep Batch Mode Beep Off * Batch Mode Beep Off Quantity Codes Delete Last Code Delete Last Code Record Counter Record Counter On Total Records Clear All Codes After Transmission Clear All Codes After Transmission Don’t Clear All Codes After Transmission *Don’t Clear All Codes After Transmission Clear All Codes After Transmit Records to Host Transmit Inventory Records Batch Mode Transmit Delay *Batch Mode Transmit Delay Off (No Delay) Batch Mode Transmit Delay Short Scanner Name Non-Base BT Connection Base BT Connection Non-BaseBT Connection Changing the Scanner’s Bluetooth PIN Code Save Bluetooth PIN Auto Reconnect Mode Auto Reconnect On Maximum Link Attempts Maximum Link Attempts Relink Time-Out Relink Time-Out : * : R E S E T _ . ³ Page Input/Output Settings Beeper Volume – Good Read Beeper Pitch – Good Read Beeper - Transmit Order Beeper Pitch – Error Beeper Duration – Good Read Number of Beeps – Good Read Number of Beeps – Error LED Settings LED Brightness Red Medium Green Medium * Red High * Green High In-Standand Out-of-StandDefaults Defaults In-StandDefaults Out-of-StandDefaults Presentation Modes Manual Activation Mode Manual Activation Mode Off In-Stand * Manual Activation Mode On End Manual Activation After Good Read Manual Activation Laser Timeout - Button Settings Laser Timeout - Button Hold Laser Timeout - Button Release In-Stand Release Out-of-Stand CodeGate *CodeGate Off In-Stand CodeGate On * CodeGate On Button Function End Object Detection After Good Read End Object Detection After Good Read Do Not End Object Detection After Good Read Do Not End Object Detection * End Object Detection After Object Detection Laser Timeout Object Detection Laser Timeout In-Stand Timeout Out-of-Stand Object Detection Distance Activation Character Activation Character End Character Activation After Good Read End Character Activation After Good Read Do Not End Character Activation After Good Read Deactivation Character Deactivation Character Short (500 ms) * Medium (750 ms) Long (1000 ms) To Add an Output Sequence Enter Sequence 2.Code I.D 3.Length 4.Character Match Sequences SEQBLK62001241FF6A001342FF69001243FF Sequence Timeout Sequence Match Beeper Sequence Match Beeper Off Partial Sequence Discard Partial Sequence Require Output Sequence On/Not Required Off Required On/Not Required Page Data Editing Example: Add a Suffix to a specific symbology Step 1. Scan Add Suffix To Clear One or All Prefixes or Suffixes Clear One Prefix (Suffix) Clear All Prefixes (Suffixes) Transmit Alternate Extended ASCII Transmit Normal Extended ASCII Alternate Extended ASCII Characters Alternate Extended ASCII Characters (Continued) * Enable Disable * None LRC Starts on 1st Character Intercharacter Delay User Specified Intercharacter Delay Delay Length Character to Trigger Delay Interfunction Delay Interfunction Delay Intermessage Delay Intermessage Delay Data Formatting Step 6. Editor Commands Enter Data Format Discard Clear One Data Format Clear all Data Formats Send Commands Send all characters Send a number of characters F2 Example: Send a number of characters F2100D Send all characters up to a particular character F3 Example: Send all characters up to a particular character F3440D 1234567890ABC <CR Insert bar code length B3 and B4 Example: Insert the symbology name and length Command string: B3F42001B4F42001F10D Code128 20 1234567890ABCDEFGHIJ <CR Move Commands Move the cursor to the beginning FE and F7 Example: Manipulate bar codes that begin with a FE31F7F2060D Move the cursor to the end Search Commands Search forward for a string B0 Example: Send bar code data that starts after a string of characters B00003464748F10D FGHIJ <CR Search backward for a string Search backward for a non-matchingcharacter Miscellaneous Commands Suppress characters FB Example: Remove spaces in bar code data FB0120F10D Stop replacing characters Compare characters Compare string Check for a number EC Example: Only output the data if the bar code begins with a number Insert a delay Data Formatter On, Not Required, Keep Prefix/Suffix Data Formatter On, Not Required, Drop Prefix/Suffix Data Format Required, Keep Prefix/Suffix Data Format Required, Drop Prefix/Suffix Data Format Non-MatchError Tone Data Format Non-Match Error Tone Off Error Single Scan Data Format Change Single Scan-Data Format Single Scan-Primary Symbologies <Default All Codabar Settings Codabar Concatenation Concatenation Timeout Codabar Redundancy Codabar Redundancy Codabar Message Length < Default All Code 39 Settings Code 39 Redundancy Code 39 Redundancy Code 39 Message Length Code 32 Pharmaceutical (PARAF) Full ASCII < Default All Interleaved 2 of 5 Settings < Default All NEC 2 of 5 Settings NEC 2 of 5 Redundancy NEC 2 of 5 Redundancy NEC 2 of 5 Message Length < Default All Code 93 Settings <Default All Straight 2 of 5 Industrial Settings <Default All Straight 2 of 5 IATA Settings <Default All Matrix 2 of 5 Settings <Default All Code 11 Settings Check Digit Validation Code 11 Redundancy Code 11 Redundancy Code 11 Message Length <Default All Code 128 Settings Code 128 Message Length ISBT 128 Concatenation Concatenation Timeout ISBT 128 Predefined Concatenation Sequences *Donation ID Number (001) and ABO/RhD Blood Groups (002) Donation ID Number (001) and Donor ID Number (019) Confidential Unit Exclusion ISBT 128 User-DefinedConcatenation Sequences Step 1. Scan the 1st Left Identifier bar code, below 3, D Step 3. Scan Save Step 4. Scan the 2nd Left Identifier bar code, below ISBT 128 User-DefinedConcatenation Sequences On/Off Allow User-Defined Sequence Require Transmit Identifiers Flag Digit Conversion <Default All GS1-128Settings <Default All Telepen Settings <Default All UPC-ASettings UPC-ANumber System and Check Digit UPC-ACheck Digit UPC-ANumber System UPC-AAddenda * 5 Digit Addenda Off UPC-AAddenda Required Required * Not Required UPC-AAddenda Separator UPC-ARedundancy UPC-ANumber System 4 Addenda Required Require Coupon Code: Don’t Require Coupon Code: Require Coupon Code Don’t Require Coupon Code UPC-ANumber System 5 Addenda Required Require Coupon Code/Addenda: <Default All UPC-E0Settings UPC-E0Number System UPC-E0Number System and Check Digit UPC-E0Check Digit UPC-E0Leading Zero UPC-E0Addenda UPC-E0Addenda Required <Default All EAN/JAN Settings EAN/JAN-13Check Digit EAN/JAN-13Addenda EAN/JAN-13Addenda Required EAN-13Beginning with 2 Addenda Required Require 2 Digit Addenda: Don’t Require 2 Digit Addenda: Don’t Require 2 Digit Addenda 2 Digit Addenda EAN-13Beginning with 378/379 Addenda Required Require Addenda: Don’t Require Addenda: Require Addenda Don’t Require Addenda EAN-13Beginning with 434/439 Addenda Required EAN-13Beginning with 977 Addenda Required EAN-13Beginning with 978 Addenda Required EAN-13Beginning with 979 Addenda Required EAN/JAN-13Addenda Separator EAN/JAN-13Redundancy EAN/JAN-13 ISBN Translate Convert ISBN to 13-Digit Convert to 13-Digit Convert to 13-DigitOn *Convert to 13-DigitOff <Default All EAN/JAN-8Settings EAN/JAN-8Addenda EAN/JAN-8Addenda Required <Default All MSI Settings Validate Type 10/11, but Don’t Transmit MSI Redundancy MSI Redundancy < Default All Plessey Code Settings < Default All GS1 DataBar Omnidirectional Settings < Default All GS1 DataBar Limited Settings < Default All GS1 DataBar Expanded Settings Emulation GS1 DataBar Emulation GS1 Code Expansion Off EAN8 to EAN13 Conversion <Default All China Post (Hong Kong 2 of 5) Settings Interface Keys IBM AT/XT and PS/2 Apple Mac/iMac ASCII HEX Utilities EZConfig-ScanningOperations Scan Data Configure Installing EZConfig-Scanningfrom the Web Resources Remove Custom Defaults Activate Defaults Activate Defaults Page Serial Programming Commands SubTag Field Usage Data Field Usage Concatenation of Multiple Commands Responses ACK Read Time-Out Read Time-Out Read Time-Out Standard Product Default Settings Product Default Settings Programming the Interface Page Page Page Page Cordless System Operation Page Input/Output Selections Page Page Prefix/Suffix Selections Data Formatter Selections Symbologies Page Page Page Page Page Page Page Postal Codes Utilities Serial Trigger Commands Product Specifications Embedded Laser Battery Radio Parameter Specification 3.07 in (78mm) Serial Output RS485 Output USB Maintenance Replacing an Interface Cable in a Corded Scanner Replacing an Interface Cable in a Base Cable Release Is the power on? Is the laser aimer on Is the scanner having trouble reading your symbols Is the bar code displayed but not entered Does the scanner read the bar code incorrectly The scanner won’t read your bar code at all Troubleshooting a Base Is the red LED on Is the green LED on Troubleshooting a Cordless Scanner Is the bar code displayed but not entered into the application Page Page Customer Support Page Reference Charts Possible modifiers Postal Symbologies Printable Characters Character Printable Characters (Continued) Extended ASCII Characters Alternate Extended PS2 Scan Code Extended ASCII Characters (Continued) Page Code Page Selection Method/Country Standard Keyboard Country Honeywell Code Page Option ISO / IEC 646 National Character Replacements 104 Key U.S. Style Keyboard 105 Key European Style Keyboard Page Page Page Matrix 2 of GS1 DataBar Page Page Honeywell Scanning & Mobility