Honeywell 1200g, 1202g Data Formatter Selections

Selection	Setting	Serial Command	Page
	* Indicates default	# Indicates a numeric entry
Suffix	Add Suffix	SUFBK2##	5-3
	Clear One Suffix	SUFCL2	5-3
	Clear All Suffixes	SUFCA2	5-3
Transmit Alternate Extended ASCII	*Transmit Alternate Extended ASCIi	KBDEXT0	5-3
Characters
	Transmit Normal Extended ASCIi	KBDEXT1	5-3
Function Code Transmit	*Enable	RMVFNC0	5-4
	Disable	RMVFNC1	5-4
Communication Check Character	*None	HSTXRC0	5-4
	LRC Starts on 1st Character	HSTXRC1	5-5
	LRC Starts on 2nd Character	HSTXRC2	5-5
	CRC	HSTXRC3	5-5
Intercharacter Delay	Range 0 - 1000 (5ms increments)	DLYCHR##	5-5
User Specified	Delay Length	DLYCRX##	5-5
Intercharacter Delay	0 - 1000 (5ms increments)
	Character to Trigger Delay	DLY_XX##	5-5
Interfunction Delay	Range 0 - 1000 (5ms increments)	DLYFNC##	5-6
Intermessage Delay	Range 0 - 1000 (5ms increments)	DLYMSG##	5-6
Data Formatter Selections
Data Format Editor	*Default Data Format (None)	DFMDF3	6-1
	Enter Data Format	DFMBK3##	6-2
	Clear One Data Format	DFMCL3	6-2
	Clear All Data Formats	DFMCA3	6-2
Data Formatter	Data Formatter Off	DFM_EN0	6-10
	*Data Formatter On,	DFM_EN1	6-10
	Not Required,
	Keep Prefix/Suffix
	Data Format Required,	DFM_EN2	6-11
	Keep Prefix/Suffix
	Data Formatter On,	DFM_EN3	6-10
	Not Required,
	Drop Prefix/Suffix
	Data Format Required,	DFM_EN4	6-11
	Drop Prefix/Suffix
Data Format Non-Match Error Tone	*Data Format Non-Match Error Tone On	DFMDEC0	6-11
	Data Format Non-Match Error Tone Off	DFMDEC1	6-11
Primary/Alternate Data Formats	Primary Data Format	ALTFNM0	6-11
	Data Format 1	ALTFNM1	6-11
	Data Format 2	ALTFNM2	6-11
	Data Format 3	ALTFNM3	6-11
Single Scan Data Format Change	Single Scan-Primary	VSAF_0	6-12
	Data Format
	Single Scan-Data Format 1	VSAF_1	6-12
	Single Scan-Data Format 2	VSAF_2	6-12
	Single Scan-Data Format 3	VSAF_3	6-12

10 - 15