About the TouchCenter (Cont'd)
TouchCenter "Arming" Screen
From the "Home" screen, press SECURITY to access the TouchCenter "Arming" screen. Use this picture and the table that follows to become familiar with the TouchCenter security functions.
Note: The Voice Status (
) button causes the TouchCenter to announce system status if depressed at least 10 seconds following its last depression. Note that Voice must be enabled for this button to function correctly during an alarm condition.
ITEM | FUNCTION |
|
|
AWAY | Press this button to arm when no one will be staying on the |
| premises. When armed in AWAY, the system will sound an |
| alarm if a protected door or window is opened, or if any |
| movement is detected inside the premises. You may leave |
| through the entrance door during the exit delay period without |
| causing an alarm. You may also |
| door, but must disarm the system with your User Code within the |
| entry delay period or an alarm will occur. |
|
|
STAY | Press this button to arm when you are staying home, but might |
| expect someone to use the entrance door later. |
| When armed in STAY, the system will sound an alarm if a |
| protected door or window is opened, but you may otherwise |
| move freely throughout the premises. Late arrivals can enter |
| through the entrance door without causing an alarm, but they |
| must disarm the system within the entry delay period or an alarm |
| will occur. |
| Note: On some residential systems, if you press the Voice |
| Status Icon while armed in the Stay Mode, the exit delay time will |
| restart (if the feature was enabled by your installer). |
|
|
7
