Honeywell 6271V manual Security System Operation contd, Screen Action

Security System Operation (cont'd)

SCREEN		ACTION
	2. On the "Arming" screen, press the
	selected arming button.
	Note: If Quick Arm is Not enabled in your
	system, you will receive a message to
	enter your User Code.
	o The TouchCenter beeps twice
	(Away and Night Maximum Modes) or
	3 times (Stay and Night Instant
	Modes)
	o a DISARM button appears
	o a text message appears stating
	which zones are arming and whether
	or not there is an entry delay
	o the screen changes to display
	the remaining exit delay time, and
	o an "open lock" appears next the
	the arming buttons as follows:
	Away – Next to the Away button
Arming (typical)	Stay – Next to the Stay button
	Instant	– Next to the Night button
	Night – Next to the Night button
	o The exit delay time continues to
	decrement to one.
	When exit delay time expires, the screen
	automatically changes to indicate the
	system is "Armed" and the "lock" next to
	the button changes to a closed lock. The
	system is now armed in the selected
	mode.
Armed (typical)

14