Honeywell 6271V manual Introduction to User Code Setup, Authority Levels

User Code Setup

Introduction to User Code Setup

Each user must be assigned a name with a corresponding 4-digit user code in order to gain access to various features and functions. The TouchCenter can hold the identity for 10 Users in its memory. If additional Users are needed, define the additional Users using the Console Emulation Mode.

Users for the system are programmed in a central user setup location that provides the specific questions for authorization levels assigned to different users. You may want these users to be the same, but there are situations in which you may want a user to have limited capabilities. These capabilites are defined by the Authority Level assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. The following information describes the authority levels that can be assigned through the TouchCenter and provides the equivalent authority level name that you will find if you are reading your alarm system manuals. The authority levels that can be assigned through the TouchCenter are as follows:

Touch-		Equivalent System Name
Center	Functions	Residential	Commercial
Authority
		Systems	Systems
Level
Master	Can perform all security functions,	Partition	Level 1
	add/delete users in assigned	Master	Master
	partition, program scheduled
	events, and change partition
	master code
Normal	Perform security functions (arm,	Standard	Level 3
	disarm)	User	Operator A

33