To disarm the system when already in the premises | Honeywell 6271V

Security System Operation (cont'd)

To disarm the system when already in the premises:

SCREEN

ACTION

1.Press the DISARM button on the "Armed" screen. The "User Authorization" screen is displayed with the instructions “To Disarm, Enter Code”.

2. Enter your 4-digit user code.

If the Arm Multi-Partitions button on the “Armed” screen is not checked, the TouchCenter beeps once, the system will disarm, and the "Arming" screen is displayed showing the system as Ready to Arm or Not Ready Fault if any zone is faulted (open).

If the Arm Multi-Partitions button on the “Armed” screen is checked, the Partition No. & Description screen is displayed listing the partitions to which you have access.

3.Press the DISARM ALL button if you wish to disarm the system. The TouchCenter beeps once and the "Arming" screen is displayed showing the system as Ready to Arm or not ready if any zone is faulted (open).

Note: If you wish to disarm only selected partitions, you must first highlight the partition(s) to be disarmed, then press the DISARM SELECTED button. The TouchCenter beeps once and the "Arming" screen is displayed showing the system as Ready to Arm or not ready if any zone is faulted (open).

24

Image 24

Honeywell 6271V manual To disarm the system when already in the premises

Contents

Ademco Table of Contents Table of Contents Contd About the TouchCenter IntroductionTouchCenter Interface About the TouchCenter Contd Navigating through the TouchCenterAbout Your Home Screen Navigation Icon Descriptions Icon Location Function TouchCenter Arming Screen AwayStay Night MoreChoices Icon Meaning System Overview Introduction to Your SystemBurglary Protection System Overview contd Fire Protection Safe Mode User CodesExtended Functionality System Overview contd How to Arm the System Features for Each Arming ModeArming Exit Entry Perimeter Interior Mode Delay Armed Security System Operation Security System Operation contd Screen Action How to Arm Multiple Partitions To arm multiple partitionsSelected How to Display Faults Bypass Zones, Enter Code Security System Operation Contd How to Bypass Zones To bypass zones do the following Press the Bypass Selected Bypass Press the Back button to return to the Arming screen How to Remove Bypassed Zones Security System Operation contd How to Disarm the System To disarm the system when entering the premises To disarm the system when already in the premises Security System Operation Contd How to Check the Status of Other Partitions Security System Operation Contd How to Send Emergency Messages How to View the Event Log When All Partitions or All Events Next and Previous buttons willNext and Previous buttons Fire Alarm System Operation Introduction to Fire Alarm System OperationCase of Fire Alarm Silencing and Clearing a Fire Alarm Fire Alarm System Operation contd User Code Setup Introduction to User Code SetupAuthority Levels User Code Setup contd How to Access User SetupAccess User Setup as follows How to Add a User Add a user as follows Enter User Code… displayed Digits User Code Setup Contd Selected, the Allow Arm/Disarm from User Code Setup contd How to Delete a User Delete a User as followsAuthorized Code How to Edit a User Edit a user as followsInstructions Enter Authorized Code User Code Setup Contd Advanced System Features Introduction to Advanced System FeaturesConsole Emulation Mode How to Enter Console Emulation Mode Advanced System Features Contd Voice Messages Introduction to Recording and Retrieving Messages Voice Messages Contd Recording a Voice MessageTo record a voice message, do the following Retrieving and Deleting a Voice Message To retrieve a voice message, do the following Summary TouchCenter LED Operation TouchCenter LED OperationLED Description TouchCenter Setup How to Access TouchCenter Setup OptionsHow to Access Setup Access the Setup features as follows TouchCenter Setup Contd How to Adjust the Touch Screen Contrast You may adjust the touch screen contrast as follows How to Adjust the Volume How to Select Screen Backlight Off Activation Time Backlight Off After arrow button. a TouchCenter Setup Contd Button. a Settings Changed! pop-up How to Select Homepage After Time TouchCenter Setup Contd How to Set the Time and Date TouchCenter Setup Contd Enter 2 digits for the hour TouchCenter Setup Contd How to Access Operating Modes Access the Operating Modes feature as followsTouchCenter Operating Modes Operating Modes Chime, Voice, and Voice Chime TouchCenter Operating Modes Contd Press the Operating Modes How to Clean your TouchCenter Clean the TouchCenter as followsMaintaining Your System Maintaining Your System Contd Routine Care Glossary Glossary Contd Page Page Page Page Page Page ONE Year Limited Warranty