A S S E M B LY STEP 5 |
UPPER HANDLEBAR |
CONSOLE MAST |
LOWER HANDLEBAR |
NOTE: There is NO hardware bag for this step. All hardware is
A)Remove PRE-ATTACHED BOLTS and WASHERS from CONSOLE MAST.
B)Slide right LOWER HANDLEBAR on CONSOLE MAST and attach by reinserting
C)Remove PRE-ATTACHED SET SCREWS from right UPPER HANDLEBAR
D)Slide right UPPER HANDLEBAR onto LOWER HANDLEBAR and secure by reinserting
E)Repeat on other side.
After handlebars are assembled they will rotate freely – be cautious. Until the machine is fully assembled, do not grab the handlebars for support.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
11
LIMITED WARRANTY