Horizon Fitness EX-66 manual YOU’RE Finished

A S S E M B LY STEP 9
CONSOLE	CONSOLE WIRES
	PRE-ATTACHED
	SCREWS

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A)Attach the CONSOLE MAST wires to the CONSOLE wires .

B)Carefully tuck the CONSOLE MAST wires into the CONSOLE MAST before attaching the CONSOLE.

C)Attach CONSOLE to the CONSOLE MAST using the 4 PRE-ATTACHED SCREWS (screws will have to be removed from the console first).

DO NOT PINCH WIRES!

Connect AC ADAPTOR to the AC ADAPTOR INPUT, located at front of the main frame. Connect ADAPTOR to a power outlet. Locate the ON / OFF switch on the back of the CONSOLE. Flip the switch to the ON position. After a “beep”, the CONSOLE will turn on.

YOU’RE FINISHED!

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

ELLIPTICAL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

15

LIMITED WARRANTY