INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
A S S E M B LY STEP 8 |
SCREWS (Q) |
ELBOW JOINT |
INSIDE ELBOW COVER |
OUTSIDE ELBOW COVER |
A)Open HARDWARE BAG FOR STEP 8.
B)Attach the OUTSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
C)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Note the position of the snap tabs before snapping into position.
D)Attach the INSIDE ELBOW COVER to the ELBOW JOINT using 1 SCREW (Q).
E)Repeat on other side.
HARDWARE BAG FOR STEP 8 CONTENTS :
SCREW (Q) 15 mm Qty: 4
LIMITED WARRANTY
14
