Hoshizaki Condensing Unit Models SRK-14J/3 B. Maintenance, Stainless Steel Exterior, Condenser

Models: Condensing Unit Models SRK-14J/3 KMS-1401MLJ

1 54
Download 54 pages 29.87 Kb
Page 51
Image 51
B. Maintenance

B. Maintenance

This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.

1.Stainless Steel Exterior WARNING

Only qualified service technicians should service this icemaker.

Move the control switch to the "OFF" position and turn off the power supply to the SRK condensing unit before servicing the KMS or SRK. Place the KMS disconnect (if applicable) in the off position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

1.Stainless Steel Exterior

To prevent corrosion, wipe the exterior occasionally with a clean, soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt buildup.

2.Storage Bin Scoop

Wash your hands before removing ice from the storage bin. Use the plastic scoop provided (storage bin accessory).

Clean the scoop using a neutral cleaner. Rinse thoroughly after cleaning.

3.Dispenser Unit/Storage Bin

The dispenser unit/storage bin is for ice use only. Do not store anything else in the dispenser unit/storage bin.

Clean the dispenser unit/storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning.

4.Condenser

Check the condenser once a year, and clean the coil if required by using a brush or vacuum cleaner. More frequent cleaning may be required depending on location.

51

Page 51
Image 51
Hoshizaki Condensing Unit Models SRK-14J/3 B. Maintenance, Stainless Steel Exterior, Storage Bin Scoop, Condenser