Table 3 HP 3PAR Recovery Manager Software for Microsoft SQL Server Event Messages (continued)
Event ID | Event Message |
5372 RMS5372: ERROR: Failed to connect to the NetBackup master server.
5373 RMS5373: ERROR: No storage units available for use.
5374 RMS5374: ERROR: The specified policy is not a valid client type.
5375 RMS5375: ERROR: This operation is not allowed at this time.
5376 RMS5376: ERROR: The specified client does not exist in the specified policy.
5377 RMS5377: ERROR: The specified policy is not active.
5378 RMS5378: ERROR: The current InForm OS does not support the specified command.
Description/Action
Recovery Manager could not connect to the NetBackup server.
•Ensure that you can connect to the NetBackup master server.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
The backup cannot be created because no storage units are available.
•Ensure that the storage units are configured and available for use.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
The process cannot continue because the policy is not a valid client type.
•Ensure that the policy is a valid client type.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
The NetBackup server is not currently allowing this operation.
•Wait some time and try the operation again.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
Recovery Manager cannot locate the client in the policy specified.
•Verify that the client is correctly configured for the specified policy.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
To create backups, the policy used to create the backup must be active.
•Verify that the specified policy is active.
•For more details, check the application event log and NetBackup logs on the NetBackup server.
The command you entered is not supported in this version of the HP 3PAR InForm Operating System Software.
•Ensure that the correct commands are used for the installed InForm OS.
•Upgrade the InForm OS to a version that allows you to use the specified command.
82 Event Messages
