1.Disconnect the power connector cable (1) from the system board.
2.Release the power connector cable from the retention clip (2) built into the display panel assembly.
3.Remove the two Phillips PM2.0×4.1 screws (3) that secure the power connector to the display panel assembly.
4.Remove the power connector cable (4).
Reverse this procedure to install the power connector cable.
Front-facing webcam
Description | Spare part number |
|
|
|
|
Before removing the
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 19).
Remove the
30 Chapter 5 Removal and replacement procedures
