![](/images/new-backgrounds/1319744/31974457x1.webp)
Wireless antenna
DescriptionSpare part number
Antenna Kit, includes WWAN antenna auxiliary and main cables and transceivers and WLAN antenna auxiliary and main cables and transceivers
For use only on HP Pro Slate 10 EE G1 tablet models | |
|
|
For use only on HP Pro Tablet 10 EE G1 tablet models | |
|
|
Before removing the wireless antenna, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 19).
Remove the wireless antenna:
1.Disconnect the WWAN auxiliary antenna cable (1) from the WWAN module auxiliary terminal.
2.Release the WWAN auxiliary antenna cable from the retention clips (2) built into the display panel assembly.
Wireless antenna 23