14.Detach the WLAN auxiliary antenna transceiver (2) from the display panel assembly. (The WLAN auxiliary antenna transceiver is attached to the display panel assembly with
15.Remove the WLAN auxiliary antenna cable and transceiver. Reverse this procedure to install the wireless antennas.
Sensor board
Description | Spare part number |
|
|
Sensor board (includes cable and | |
|
|
Before removing the sensor board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 18).
5.Disconnect the battery cable from the system board (see Battery on page 19).
Remove the sensor board:
Sensor board 27
