Hard drive

NOTE: The Hard Drive Hardware Kit, spare part number 755740-001, includes the hard drive bracket, hard drive connector cable, and screws.

Description

Spare part number

 

 

750-GB, 5400-rpm, 7.0-mm

752099-001

 

 

500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm

732000-005

 

 

500-GB, 5400-rpm, 7.0-mm

683802-005

 

 

Before removing the hard drive, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the bottom cover (see Bottom cover on page 28).

5.Disconnect the battery.

Remove the hard drive:

1.Disconnect the hard drive connector cable (1) from the system board.

2.Remove the Phillips PM2.0×7.0 screw (2) that secures the hard drive and battery to the computer.

3.Remove the three Phillips PM2.0×3.0 screws (3) that secure the hard drive to the computer.

36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

Page 44
Image 44
HP 11-n001xx x360, 11t-n000 x360, 11-n038ca x360, 11-n041ca x360, 11-n040ca x360, 11-n012dx x360, 11-n010dx x360 Hard drive