HP 11-n010dx x360, 11t-n000 x360, 11-n038ca x360, 11-n041ca x360, 11-n040ca x360, 11-n012dx x360 manual

NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board:

●WLAN module (see WLAN module on page 32)

●Memory module (see Memory module on page 41)

●Solid-state drive (see Solid-state drive (M.2) on page 34)

●Heat sink (see Heat sink on page 46)

●Fan (see Fan on page 45)

Remove the system board:

1.Disconnect the following cables from the system board: (1): Power connector cable

(2): Wireless antennas (may include one or two antennas)

(3): Keyboard cable

(4): Webcam cable

(5): Display cable

(6): Power button board cable

(7): Fan cable

(8): Speaker cable

(9): Touchpad board cable

(10): Hard drive cable

2.Remove the four Phillips PM2.0×3.0 screws (1) that secure the system board to the computer.

60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts