CAUTION: Support the display assembly when removing the screws. Failure to support the display assembly can result in damage to the display assembly and other computer components.

6.Lift the computer to force the hinges to rotate upward to an angle (4).

7.Separate the display assembly from the computer (5).

If it is necessary to replace any of the display assembly subcomponents:

1.To remove the display enclosure:

NOTE: The display enclosure is available using the following spare part numbers: 758846-001 for use in red models

758845-001 for use in silver models

a.Remove the two screw covers (1).

b.Remove the two Phillips PM2.5×4.0 screws (2) that secure the enclosure to the display.

54 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

Page 62
Image 62
HP 11-n001xx x360, 11t-n000 x360, 11-n038ca x360, 11-n041ca x360, 11-n040ca x360, 11-n012dx x360, 11-n010dx x360, 11-n011dx x360