5.Disconnect the power cord from the electrical outlet and then from the computer.
6.Disconnect all peripheral device cables from the computer.
NOTE: During disassembly, label each cable as you remove it, noting its position and routing. Keep all screws with the units removed.
CAUTION: The screws used in the computer are of different thread sizes and lengths; using the wrong screw in an application may damage the unit.
Access panel
Description | Spare part number |
|
|
Access panel | |
|
|
1.Prepare the computer for disassembly (Preparation for disassembly on page 26).
2.Loosen the captive Torx screw (1) on the back panel that secures the panel to the computer.
3.Slide the side panel toward the back (2), and then pull it away from the computer.
NOTE: Lay the computer on its side to install internal parts.
Rear panel appearance may vary.
To replace the access panel, reverse the removal steps.
Access panel | 27 |