Removing a hard drive
NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Also, if you are replacing the primary hard drive, make sure you have created a Recovery Disc Set to restore the operating system, software drivers, and any software applications that were preinstalled on the computer.
1.Prepare the computer for disassembly (Preparation for disassembly on page 26).
2.Remove the access panel (Access panel on page 27).
3.Disconnect the power and data cables (1) from the rear of the hard drive.
4.Remove the four Torx screws (2) that secure the drive to the computer.
5.Slide the hard drive toward the bottom of the computer (3), and then remove it from the computer..
To install a hard drive, reverse the removal procedures.
40 | Chapter 6 Removal and replacement procedures |