HP 200 G1 manual Power supply, Description Spare part number

Power supply

Description	Spare part number
Power supply, 180W, APFC	751590-001
Power supply, 180W, Energy Star 6	751589-001

WARNING! Voltage is always present on the system board when the computer is plugged into an active AC outlet. To avoid possible personal injury and damage to the equipment the power cord should be disconnected from the computer and/or the AC outlet before opening the computer.

NOTE: When installing a new power supply, be sure to set the red switch to the setting (230 V or 115 V) appropriate for the country in which the computer is used.

1.Prepare the computer for disassembly (Preparation for disassembly on page 26).

2.Remove the access panel (Access panel on page 27).

3.Disconnect all power cables from the mass storage devices and from the system board connectors labeled CPU_PWR and ATX_PWR.

4.From the rear of the computer, remove the four Torx screws that secure the power supply to the chassis.

48 Chapter 6 Removal and replacement procedures