HP 200 G1 manual Removing an optical drive

Removing an optical drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the computer.

To remove an optical drive:

1.Prepare the computer for disassembly (Preparation for disassembly on page 26).

2.Remove the access panel (Access panel on page 27).

3.Remove the front bezel (Front bezel on page 28).

4.Disconnect the power and data cables (1) from the rear of the optical drive.

5.Remove the two Torx screws (2) that secure the drive to the computer.

6.Slide the drive out of the computer (3).

To install an optical drive, reverse the removal procedures.

Drives 39