HP 200 G1 manual Power switch/LED assembly, Remove the optical drive Removing an optical drive on

Power switch/LED assembly

Description	Spare part number
Power switch/LED assembly	667850-001

1.Prepare the computer for disassembly (Preparation for disassembly on page 26).

2.Remove the access panel (Access panel on page 27).

3.Remove the front bezel (Front bezel on page 28).

4.Remove the optical drive (Removing an optical drive on page 39).

5.Disconnect the braided cables from the black system board connector labeled F_PANEL (1).

6.Remove the cable from the metal clip (2) built into the computer.

7.From the inside of the computer, push up on the tab on the bottom of the assembly (3) to disengage it from the computer.

Power switch/LED assembly 43