HP 200 G1 manual

To remove the system board:

1.Prepare the computer for disassembly (Preparation for disassembly on page 26).

2.Remove the access panel (Access panel on page 27).

3.Remove any installed expansion cards (Expansion cards on page 32).

4.Disconnect all cables from the system board.

5.Remove the six screws (1) that secure the system board to the chassis.

6.Slide the system board toward the front of the chassis (2), and then lift it up and out of the chassis

(3).

To install the system board, reverse the removal procedure.

NOTE: When replacing the system board, you must also change the chassis serial number in the BIOS.

NOTE: After installing a new system board, always update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system ROM BIOS can be found at: http:\ \h18000.www1.hp.com/support/files.

System board 51