Table A-3Computer Setup—Security (continued)

System Security

Virtualization Technology (enable/disable) - Controls the virtualization features of the processor.

 

Changing this setting requires turning the computer off and then back on. Default is disabled.

 

 

Secure Boot

This is a feature of Windows 8.

Configuration

Legacy Support—Enable/Disable. Allows you to turn off all legacy support on the computer,

 

 

including booting to DOS, running legacy graphics cards, booting to legacy devices, and so

 

on. If set to disable, legacy boot options in Storage > Boot Order are not displayed.

 

Default is enabled.

 

Secure Boot—Enable/Disable. Allows you to make sure an operating system is legitimate

 

before booting to it, making Windows resistant to malicious modification from preboot to full

 

OS booting, preventing firmware attacks. UEFI and Windows Secure Boot only allow code

 

signed by pre-approved digital certificates to run during the firmware and OS boot process.

 

Default is disabled, except for Windows 8 systems which have this setting enabled. Secure

 

Boot enabled also sets Legacy Support to disabled.

 

Key Management—This option lets you manage the custom key settings.

 

Clear Secure Boot Keys—Don't Clear/Clear. Allows you to delete any previously loaded

 

 

custom boot keys. Default is Don't Clear.

 

Key Ownership—HP Keys/Custom Keys. Selecting Custom Mode allows you to modify

 

 

the contents of the secure boot signature databases and the platform key (PK) that verifies

kernels during system start up, allowing you to use alternative operating systems. Selecting HP Keys causes the computer boot using the preloaded HP-specific boot keys. Default is HP Keys.

Fast Boot—Enable/Disable. Fast boot disables the ability to interrupt boot, such as pressing f keys to access items before the operating system loads. Default is disabled.

NOTE: If Windows 8 detects a serious error, it will interrupt the boot process automatically and display advanced boot options.

From Windows 8, you can press Shift and select Restart to access the screen that lets you boot to a device or troubleshoot your computer.

Computer Setup—Power

NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.

Table A-4Computer Setup—Power

Option

Description

 

 

Hardware Power

SATA Power Management – Enables or disables SATA bus and/or device power management.

Management

Default is enabled.

 

S4/S5 Wake on LAN – Enables or disables remotely waking up the computer from S4 (hibernate)

 

and S5 (power is off) power states. Default is disabled.

 

 

Thermal

CPU Fan Speed - Display the CPU fan speed in rpm.

 

CPU Fan Check (<CTRL-A>/Advanced Mode only) – Enable/Disable the CPU Fan Check.

 

 

60

Appendix A Computer Setup (F10) Utility

Page 68
Image 68
HP 200 G1 manual Computer Setup-Power