HP 2600/2700 Send a fax using speed dials, Send a fax using monitor dialing

Use the fax features

Chapter 11

3Press to redial the last number dialed.

4Press Start Black.

5If the most recently sent black-and-white fax is stored in memory, the Fax Mode screen appears. Press 1 to send a new fax.

6Press Start Black.

7If you have another page to fax, when prompted, press 1. Load it face down on the right front corner of the glass, and then press OK. If you do not have another page to fax, press 2.

The HP all-in-one sends the fax.

Send a fax using speed dials

You can quickly send a fax from the HP all-in-one using speed dials. You can send a black-and-white or color fax using speed dials; the following section provides instructions for sending the fax in black and white.

Speed dial entries will not appear until you have set them up. For more information, see Set up speed dialing.

1Load the first page face down on the right front corner of the glass.

2Press Fax.

The Enter Fax Number screen appears.

3Press to access speed dials.

4Press until the appropriate speed-dial entry appears.

Note You can also enter the speed-dial code by using the keypad on the control panel.

5Press OK to select the speed-dial entry.

6Press Start Black.

7If the most recently sent black-and-white fax is stored in memory, the Fax Mode screen appears. Press 1 to send a new fax.

8Press Start Black.

9If you have another page to fax, when prompted, press 1. Load the next page face down on the right front corner of the glass, and then press OK. If you do not have another page to fax, press 2.

Send a fax using monitor dialing

Monitor dialing allows you to dial a number from the control panel as you would dial a regular telephone. This feature is useful when you want to use a calling card to charge the call and you need to respond to tone prompts while dialing. It also allows you to dial the number at your own pace, if necessary.

You can send a black-and-white or color fax using monitor dialing; the following section provides instructions for sending the fax in black and white.

Note Make sure the volume is turned on, or you will not hear a dial tone. For information, see Adjust the volume.

To send a fax using monitor dialing from the control panel

1Load the first page face down on the right front corner of the glass.

2Press Fax.

The Enter Fax Number screen appears.

3Press Start Black.

110 HP Photosmart 2600/2700 series all-in-one