3Click Retry to retry the plug and play setup. If this does not work, continue to the next step.

4Verify that the USB cable is set up properly as follows:

Unplug the USB cable and plug it in again.

Do not attach the USB cable to a keyboard or non-powered hub.

Verify that the USB cable is 3 meters or less in length.

If you have several USB devices attached to your computer, you might want to unplug the other devices during the installation.

5Continue with the installation and restart the computer when prompted. Then open HP Director and check for the essential icons (Scan Picture, Scan Document, Send Fax, and HP Gallery).

6If the essential icons do not appear, remove the software and then reinstall it. For more information, see Uninstall and reinstall the software.

I received a message that an unknown error has occurred

Solution

Try to continue with the installation. If that doesn’t work, stop and then restart the installation, and follow the directions on the screen. If an error occurs, you might need to uninstall and then reinstall the software. Do not simply delete the HP all- in-one program files from your hard drive. Make sure to remove them properly using the uninstall utility provided in the HP all-in-one program group.

For more information, see Uninstall and reinstall the software.

Some of the icons are missing in the HP Director

If the essential icons (Scan Picture, Scan Document, Send Fax, and HP Gallery) do not appear, your installation might not be complete.

Solution

If your installation is incomplete, you might need to uninstall and then reinstall the software. Do not simply delete the HP all-in-one program files from your hard drive. Make sure to remove them properly using the uninstall utility provided in the

HP all-in-one program group. For more information, see Uninstall and reinstall the software.

The fax wizard does not start

information Troubleshooting

User Guide

177