Chapter 16

Troubleshooting information

The color graphics display shows the wrong language

Solution

Usually, you set the language and country/region when you first set up the HP all- in-one. However, you can change these settings at any time by using the following procedure:

1Press Setup.

2Press 7, and then press 1.

This selects Preferences, and then selects Set Language & Country/Region. A list of languages appears. You can scroll through the list of languages by pressing the and arrows.

3When your language is highlighted, press OK.

4When prompted, press 1 for Yes or 2 for No.

The countries/regions for the selected language appear. Press or to scroll through the list.

5When the language you want to select is highlighted, press OK.

6When prompted, press 1 for Yes or 2 for No.

The wrong measurements are showing in menus on the color graphics display Solution

You may have selected the incorrect country/region when setting up your HP all- in-one. The country/region you select determines the paper sizes shown on the color graphics display.

To change the country/region, you must first set the default language again. Usually, you set the language and country/region when you first set up the HP all- in-one. However, you can change these settings at any time by using the following procedure:

1Press Setup.

2Press 7, and then press 1.

This selects Preferences, and then selects Set Language & Country/Region.

172

HP Photosmart 2600/2700 series all-in-one