Use the copy features
Chapter 7
Change default copy settingsWhen you change copy settings from the control panel, the settings apply only to the current copy job. To apply copy settings to all future copy jobs, you can save the settings as defaults.
When you change copy settings from the control panel or the HP Director, the settings apply only to the current copy job. To apply copy settings to all future copy jobs, you can save the settings as defaults.
1Make any needed changes to the settings in the Copy Menu.
2Press 0 to select Set New Defaults from the Copy Menu.
3Press OK to accept the settings as the new default settings.
The settings you specify here are only saved on the HP
You set the number of copies that you want to print by using the Number of Copies option in the Copy Menu.
1Make sure you have paper loaded in the input tray.
2Load your original face down on the right front corner of the glass.
3Press Copy, and then press 1.
This displays the Copy Menu and then selects Number of Copies.
4Press or use the keypad to enter the number of copies, up to the maximum, and then press OK.
(The maximum number of copies varies by model.)
Tip If you hold down either of the arrow buttons, the number of copies changes by increments of 5 to make it easier to set a large number of copies.
5Press Start Copy Black or Start Copy Color.
In this example, the HP
You can use the HP
62 | HP Photosmart 2600/2700 series |