4Press Start Black again.

The HP all-in-one scans the page into memory.

5If you have another page to fax, when prompted, press 1. Load the next page face down on the right front corner of the glass, and then press OK. If you do not have another page to fax, press 2.

The Enter Fax Number screen appears.

6Once you hear the dial tone, enter the number by using the keypad on the control panel.

7Follow any prompts that might occur.

Your fax is sent when the receiving fax machine answers.

Receive a fax

Depending on the Auto Answer setting, your HP all-in-one can receive faxes automatically or manually. If you have set the Auto Answer option to Off, you will need to receive faxes manually. If the Auto Answer option is set to On, your HP all-in-one will automatically answer incoming calls and receive faxes. For more information on Auto Answer, see Set up the HP all-in-one to receive faxes.

Note If you installed a photo or gray photo print cartridge for printing photos, you might want to replace it with the black print cartridge when receiving faxes. See Work with print cartridges.

Set the number of rings before answering

You can specify how many rings should occur before your HP all-in-one automatically answers the incoming call.

Note This setting only applies if Auto Answer is set to On.

The Rings to Answer setting is important if you have an answering machine on the same phone line as your HP all-in-one. You want the answering machine to answer the phone before the HP all-in-one. The number of rings to answer for the HP all-in-one should be greater than the number of rings to answer for the answering machine.

For example, set your answering machine to answer in 4 rings and your HP all-in-one to answer in the maximum number of rings supported by your device. (The maximum number of rings varies by country/region.) In this setup, the answering machine will answer the call and the HP all-in-one will monitor the line. If the HP all-in-one detects fax tones, the HP all-in-one will receive the fax. If the call is a voice call, the answering machine will record the incoming message.

To set the number of rings before answering from the control panel

1Press Setup.

2Press 4, and then press 4 again.

This displays the Basic Fax Setup menu and then Rings to Answer.

3Enter the appropriate number of rings by using the keypad.

4Press OK to accept the setting.

features fax the Use

User Guide

111