Using the device control panel

You can also configure settings at the device control panel. This section describes how to perform the following tasks:

●Printing a configuration page

●Printing a device control panel menu map

●Restoring the factory-set defaults

●Changing the device control panel display language

●Changing the default media size

●Using the device volume controls

●Changing print settings

Printing a configuration page

You can see which device settings are currently selected by printing a configuration page.

To print a configuration page

1.Press MENU/ENTER.

2.Use the < or the > button to select Reports, and then press MENU/ENTER.

3.Use the < or the > button to select Config report, and then press MENU/ENTER.

The device exits the menu settings and prints the report.

Printing a device control panel menu map

You can see all of your device control panel menu options by printing a device control panel menu map.

To print a device control panel menu map

1.On the device control panel, press MENU/ENTER.

2.Use the < or the > button to select Reports, and then press MENU/ENTER.

3.Use the < or the > button to select Menu structure, and then press MENU/ENTER. A menu map prints, showing all of the device control panel menu options.

Restoring the factory-set defaults

Restoring the factory-set defaults returns all of the settings to the factory defaults and clears the fax header name and phone number. (See the fax guide for information about how to add your information to the fax header.) This procedure clears fax numbers and names that are associated with one-touch keys and speed-dial codes, and deletes any pages that are stored in the memory. The procedure then automatically restarts the device.

ENWW

Using the device control panel 13