Loading originals to copy

Use these instructions to load originals into your device for copying. For the best quality copies, use the flatbed scanner. See Selecting media for the automatic document feeder (ADF) for information about choosing original documents for copying.

To load originals onto the flatbed scanner

1.Make sure that the automatic document feeder (ADF) contains no media.

2.Lift the flatbed scanner cover.

3.Place the original document face-down on the flatbed scanner with the upper, left corner of the document located in the lower-right corner of the glass.

4.Gently close the lid.

5.The document is ready to be copied.

CAUTION

To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner

 

surface. Always close the scanner lid when the device is not in use.

48 Chapter 4 Copying

ENWW