Introducing the Switch
Introducing the Switch
Front of the Switches
Switch | State | Meaning |
LEDs |
|
|
|
|
|
Auxiliary |
| Reserved for future development |
(green) |
|
|
|
|
|
* The blinking behavior is an on/off cycle once every 1.6 seconds, approximately. ** The blinking behavior is an on/off cycle once every 0.5 seconds, approximately.
LED Mode Select Button and Indicator LEDs
The operation of the Mode LED is controlled by the LED Mode select button, and the current setting is indicated by the LED Mode indicator LEDs near the button. Press the button to step from one view mode to the next.
Expansion Module LED |
| Port LEDs Link |
|
|
|
|
|
|
|
| |||
| and Mode |
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
| ProCurve Switch Mdl EPS RPS Status of the Back | *Spd mode: off = 10 Mbps |
|
|
|
|
| ||||||
| Link | 1 |
| 3 | 5 | 7 | 9 | 11 | |||||
|
| flash = 100 Mbps | Mode | ||||||||||
| J8692A | PoE |
| on = 1000 Mbps |
|
|
|
|
|
|
|
| |
| Status |
| Act |
|
|
|
|
|
|
|
|
|
|
Power | PoE | LED | FDx |
|
|
|
|
|
|
|
|
|
|
| Tmp | Mode | Spd* |
|
|
|
|
|
|
|
|
|
|
Fault | Fan |
| PoE |
|
|
|
|
|
|
|
|
|
|
| Test |
| Usr |
|
|
|
|
|
|
|
|
|
|
Locator |
| Reset | Clear | Console | Auxiliary Port | Link | 2 | Mode | 4 | 6 | 8 | 10 | 12 |
LED Mode select button
and indicator LEDs
Figure